Can a dented or chipped door be repaired rather than replaced?
In many cases, yes. Where the door is sound and the damage is localised, the area can be rebuilt and refinished in place, which avoids replacing and redecorating a whole door set.
Doors, frames & architraves
Door & Frame Repairs
Doors and frames take constant knocks from trolleys, furniture, luggage and daily traffic, and a damaged edge or dented lining rarely justifies a new door set. Where the door and the damage are suitable, we repair and refinish in place.
We work on suitable finished timber, laminate and veneer-effect doors, together with painted door surfaces, linings, frames and architraves. The construction and finish are identified at assessment, because a hollow-core, laminate-faced and solid painted door all behave differently.
Scope
What we repair
- Suitable finished timber and veneer-effect door faces
- Laminate-faced and foil-wrapped doors
- Painted door surfaces, edges and rails
- Door linings, frames, stops and architraves
- Damaged corners, bottom rails and lock-side edges
- Communal and corridor door sets in managed buildings
- Redundant ironmongery holes and fixing damage on suitable faces
Damage
Typical damage we see
- Impact dents and chips from trolleys, beds and furniture moves
- Scuffed and kicked bottom rails and door edges
- Gouges and scratches along frames and architraves
- Damage left after handles, closers or locks are changed
- Chipped and lifting laminate or veneer edges
- Trade and transit damage on new-build and fit-out sites
How it works
Our repair process
- 01
Assessment
Photographs of the damage and the whole door or frame are reviewed so we can identify the construction and finish and confirm a repair is suitable.
- 02
Preparation
Ironmongery, glazing, flooring and surrounding decoration are masked and protected, and the damaged area is cut back to sound material.
- 03
Repair
Missing material is rebuilt in layers and shaped back to the original edge, corner or face profile of the door, lining or architrave.
- 04
Finish
Colour, sheen and grain or texture are matched to the surrounding finish as closely as the materials allow so the repair blends into the door set.
- 05
Inspection
The repair is checked with you in daylight, the area is left clean, and we explain curing time and aftercare before the door returns to normal use.
Where we work
Settings we support
Homes & properties
- Internal doors, frames and architraves in family homes
- Homes being prepared for sale or valuation
- Letting and managed property between tenancies
Construction & development
- New-build door sets damaged before handover
- Fit-out and second-fix damage across multiple plots
- Show homes and marketing suites
Commercial premises
- Hotel bedroom and corridor doors
- Offices, schools and healthcare corridors
- Retail stockroom and back-of-house doors
Honest advice
Suitability and limitations
Every surface is assessed before work is agreed. Where a repair is not the right long-term answer, we will say so.
- We make no fire-door certification or compliance claims. Where a door is or may be a fire door, any work must be confirmed as acceptable by the responsible person, and certification or compliance is not something we assess, provide or imply.
- Doors that are warped, split through, water-damaged or structurally weakened need replacement rather than a surface repair.
- We do not rehang doors, ease and adjust, or install or repair hinges, closers and locking mechanisms.
- Heavily damaged or delaminating veneer across a whole face is usually beyond a localised repair.
- A repair is a close blend, not an invisible one, and strong colours or open grains can be harder to match.
Questions
Frequently asked questions
Do you work on fire doors?
We do not make fire-door certification or compliance claims of any kind. If a door is or may be a fire door, the responsible person must confirm what is acceptable before any work is carried out.
Which door finishes can you repair?
Suitable finished timber, veneer-effect, laminate-faced and painted surfaces, along with linings, frames and architraves. The finish is identified at assessment from your photographs.
Can you make good after ironmongery has been changed?
Where the face and edge are suitable, redundant holes and fixing damage can be filled and refinished so the door looks tidy again.
Related
Related services
Coverage
Where we cover
We are based in Bolton and work across Greater Manchester and the North West, with wider coverage available for commercial work.
Office enquiries are answered Monday to Friday, 9:00am–3:00pm.
Helpful next steps
Useful reading before you enquire
- See genuine completed repairsBefore and after photographs of real Surface Magic work, not stock imagery.
- Stopping surface damage from getting worseWhy cosmetic damage spreads and what to do before it becomes structural.
- Surface repairs for homes and propertyWhat repair work looks like for homeowners, landlords and letting agents.
Surface Magic Repairs
Why Replace When You Can Repair?
Send photographs of the damage and we will advise on the most sensible route — repair where it is suitable, honest guidance where it is not.